K.2 series as an instrument amplifer

K.2 Series Training : K.2 as an Instrument Amplifer

1 ) K.2 Series Introduction

1m 37s

2 ) Back Panel Navigation

1m 53s

3 ) Floor Monitor Setting

1m 32s

4 ) Pairing a K.2 With A Subwoofer

1m 35s

5 ) K.2 as an Instrument Amplifer

1m 48s

6 ) K.2 for Acoustic Guitar and Vocals

1m 24s

7 ) K.2 Dance Preset

1m 13s

8 ) Directivity Matched Transition (DMT)

1m 19s

9 ) Power Efficiency

1m 8s

10 ) K.2 Final assessment

Lesson Description

K.2 series as an instrument amplifer 1m 48s

In this video, you'll learn how to use the K.2 Series powered loudspeaker as an instrument amplifiers. Examples include keyboard amplifier and bass amplifier

Video Transcript

K.2 series as an instrument amplifer 1m 48s
0:08
Hi Everyone. It's Chris from QSC
0:10
And in this video, we're going to show you how to use your K.2 speaker as an instrument amplifier
0:15
There's a few different input and preset options on the K.2
0:18
So we're going to go through a couple of different examples of how you can use it
0:21
based on what instrument you're connecting to it
0:24
The first example we're going to look at is how to use the K.2 speaker with a line level instrument
0:28
such as a keyboard, electronic drums or anything similar that has a line level output
0:33
The K.2 has three inputs on the back of it. Two of which can be used to accept a line level signal
0:39
Keeping your K.2 speaker in the "Default" preset, you still have the ability to customize your sound
0:45
with the on-board, four band EQ, after you've plugged into it
0:50
Once our gain levels are set, our K.2 speaker is now a stand-alone PA system
0:53
With no need for external equipment or processing
1:05
Another example of how you can use your K.2 speaker as an instrument amplifier is as a bass a bass amp
1:10
There's an on-board bass amp preset. And when combined with the Hi-Z selectable instrument input
1:15
on channel B, you can use this as a portbale combo bass amplifer on stage.
1:21
By simply selecting through the on-board menu, set input B to Hi-Z instrument
1:26
and in the preset menu, select Bass amp
1:29
Now you can use this a bass amplifier in wedge monitor mode
1:32
or stand it straight up and use it on stage as needed.