Updating Firmware

TouchMix Training : Updating Firmware

1 ) TouchMix Introduction

2m 3s

2 ) Mixer Navigation

3m 16s

3 ) Simple vs. Advanced Mode

2m 37s

4 ) Preset Libraries

5m 39s

5 ) FX Wizard

5m 59s

6 ) Advanced Effects

4m 16s

7 ) Gain Wizard

3m 8s

8 ) Recording Functions

7m 15s

9 ) Adv. Recording & Playback

7m 15s

10 ) Updating Firmware

4m 20s

11 ) TouchMix 8/16 Firmware v3.0

4m 25s

12 ) RTAs

5m 46s

13 ) Connecting to Wi-Fi

3m 34s

14 ) Feedback Wizard

5m 11s

15 ) Copy & Paste

3m 0s

16 ) TM-30 Pro: Overview

5m 42s

17 ) TM-30 Pro: DAW

4m 44s

18 ) TM-30 Pro: Patch Matrix

5m 37s

19 ) TM-30 Pro: Custom Fader Banks

1m 58s

20 ) TM-30 Pro: External Control

7m 31s

21 ) TM-30 Pro: Auto Mixer

9m 2s

22 ) Assessment

Video Transcript

Updating Firmware 4m 20s
0:07
Welcome to another session of the TouchMix Training Series.
0:10
Today we're going to go over a simple but vitally important function of your mixer:
0:14
how to update the firmware.
0:16
This is a relatively simple process, but we're going to show you what it looks like,
0:20
just in case you were wondering.
0:22
If you’ve already registered your mixer, you should receive an e-mail every time we release a new firmware.
0:26
And you can always visit the TouchMix page on the QSC website for further information.
0:31
Now the first step, of course, is to download the new firmware update from the website.
0:37
If you are a PC user, you should be able to just double-click the zipped file
0:41
that contains a compressed file that ends in tar.gz.
0:46
If you’re a Mac user, then your Safari browser may automatically attempt to unzip that compressed filed as well.
0:53
To prevent this, you’ll need to go to your Safari preferences, choose the General tab,
0:59
and deselect the box at the bottom that says “Open “safe" files after downloading".
1:05
Next you’ll have to open it and extract the tar.gz file by specifying a destination.
1:10
If you’re still having trouble, you may need to change a setting in the Archive Utility.
1:15
Double-click the drive for your computer’s system and go to System > Library and go to Core Services.
1:23
Find and open the Archive Utility. In the Menu screen, select Archive Utility and choose Preferences.
1:31
Then uncheck “Keep expanding if possible." Then, proceed to unpack the file as described earlier.
1:39
Once you’re done with the process, you can change any of these settings back if you so desire.
1:43
For both PC and Mac users, now that you have the tar.gz file,
1:48
put it in the root directory of a USB storage device.
1:52
This can be a hard drive or a thumb drive, just as long as it’s formatted with the FAT32 file system.
1:58
Insert this device into one of the USB ports on the back of the TouchMix and then stop.
2:04
Ask yourself a couple questions. For instance, are you about to start a gig?
2:10
Yes? Well then maybe now is not the best time to upgrade your firmware.
2:15
Don’t do it.
2:19
This process will take a little while, so you have to be sure you have enough downtime to finish the upgrade.
2:23
Ask yourself another question: do you want to save the current settings on the Mixer?
2:28
If so, be sure to save a new Scene of your current setup so that you can recall it after the update.
2:34
The update will reset all of your channel levels, labels, EQ, etc.,
2:38
but all of your scenes and presets will remain intact.
2:42
Once you’re sure you’re ready to update, press the Menu button, press Mixer Setup, and then Upgrade.
2:48
You’ll get a warning dialogue box to remind you of all the things we just told you:
2:52
This is going to take some time, you’ll lose your current settings, etc.
2:56
The upgrade process cannot be interrupted and the device should not be unplugged until it’s complete.
3:01
If you mess this up, the TouchMix will explode. Okay, no, it won’t explode.
3:05
The TouchMix is designed to recover perfectly fine if it gets interrupted, but don’t go testing that out.
3:12
Don’t be that guy. Nobody likes that guy. That’s the same guy that puts the Mentos in the Coke bottle.
3:17
I hate that guy. Everybody hates that guy, just don’t interrupt it, alright?
3:21
Now press Proceed and confirm one final time that you do want to do this.
3:25
First, you’ll see a loading screen.
3:28
It may take up to 30 or 45 seconds to complete. Wow, that was faster than I thought!
3:32
Settle down, that’s just loading the upgrader application. Once the upgrader opens, you’ll see this screen.
3:38
Any available TouchMix upgrades will be listed under your USB devices here.
3:43
If you want to back out, simply press the Exit button. Otherwise, press Update and the process will begin.
3:50
This can take up to ten minutes, and it may look like it’s not doing anything at times,
3:53
but simply be patient. At the end of the process, a dialogue box will tell you that the upgrade was successful.
3:59
Simply press OK and the software upgrader will close and the mixer will reboot.
4:04
And that’s it. Your TouchMix is ready to go with all of the latest features.
4:08
Remember that updating your firmware is actually quite easy,
4:12
but knowing what to expect really goes a long way.
4:14
Thanks for watching.

Lesson Description

Updating Firmware 4m 20s

This is where you'll learn how to update the TouchMix's firmware.

Downloads and Links

Updating Firmware 4m 20s