You're almost ready for class!
As your final portion of the online training you are required to build a very simple design file. This file will be your starting point with the software in class, so you'll need to bring it with you.
Step 1
Here's what you should have in your design file:
- An Audio Player with a Track Count of 2
- A Matrix Mixer with 1 stereo input and 1 mono output
- A Parametric Equalizer
- A True Peak/RMS Meter
Step 2
Wire the design to meet the following criteria:
- Use the Matrix Mixer to sum the channels of the Audio Player.
- Wire the output of the Mixer into the Parametric Equalizer.
- Send the output of the Parametric Equalizer to the True Peak/RMS Meter.
- Place the True Peak/RMS Meter on it's own schematic page.
- Use at least two of the three different types or wiring to connect all of the components.
Step 3
Add the following inventory items:
- 1 x TSC-7 Touchscreen Control Panel (Found under peripherals)
Once this is done, save the file and bring it with you to class!
Congratulations! You're half way to certification status!
: Monday, 20 Jun 2016, 11:15